WELDING WIRE NON-COPPER SURFACE
- Standard: BDS 5084, GOST2246, DIN 8559
- Application: For welding of low -carbon and low-alloied with manganese steels.
The raw material: Wire rode, steel grade C05W and 08Mn4W
- Specification:
Diameter,
mm |
Tensile strength,
MPa |
| 0.8 - 2.0 |
900 - 1350 |
| 2.0 - 6.0 |
600 - 1050 |
CALLIBRATED WIRE FOR COLD HEADING
- Standard: BDS 11385, GOST 5663, DIN 1654
- Application: For making of fasteners and other products for the industry
The raw material: Wire rode steel grade C09D, C12D and C18D
- Condition of supply:
- C-cold drawn
- C+AC-cold drawn and spheroidization annealing
- C+AC+LC-cold drawn, spheroidization annealing and lightly cold reduce
- Specification:
- Wire diameter - from 2,0 up to 6,0 mm.
- Tolerance - in accordance to BDS 11385.
- Surface - non phosphatizing.
WIRE OF CONSTRUCTIONAL STEEL
- Standard: BDS 16770, GOST 17305
- Application: For industrial wire mesh, in general engineering etc.
The raw material: Wire rod steel grade C50D, C56D, C60D, C70D and C72D
Wire size,
mm |
Tolerance,
mm |
Tensile strength,
MPa |
Bending number,
minimum |
Type of surface |
| 0.8 - 1.0 |
In accordance to DIN 177 |
1000 |
5 |
Not-phosphatizing |
| 1.1 - 2.0 |
900 |
4 |
| 2.1 - 5.0 |
800 |
2 |
| 5.5 - 7.0 |
700 |
1 |
| 7.5 - 10.0 |
600 |
- |
SPRING STEEL WIRE
- Standard: BDS 3111, GOST 9389, DIN 17223-1
- Application: For spring makingq cold wound, without hardening.
The raw material: Wire rod steel grade C48D2, C52D2, C58D2, C62D2 and C72D2
- Specification:
- Rated diameter - from 0,3 up to 5,0 mm.
- Manufactured in three strength grade - Grade C, Grade B and Grade A
ROUND CARBON STEEL WIRE FOR
WIRE ROPES
- Standard: BDS 16751, GOST 7372, DIN 2078, BS 2763
- Application: For the manufacture of steel wire ropes.
The raw material: Wire rod steel grade C48D2, C52D2, C58D2, C62D2 and C72D2
- Specification:
- Rated diameter - from 0,2 up to 2,5 mm.
- Tensile strenght Grade 1570 and 1770 MPa.
- Type of finish - bright and zinc coated.